safijari/openpuck

Watch

Fork 0

mirror of https://github.com/safijari/openpuck.git synced 2026-11-03 22:30:22 +00:00

[GH-ISSUE #69] Disabling haptics on track pads for Switch modes #31

New issue

Closed

opened 2026-10-22 04:58:45 +00:00 by roman · 7 comments

roman commented

2026-10-22 04:58:45 +00:00

Owner

Originally created by @Dead-0-Zone on GitHub (Jun 20, 2026).
Original GitHub issue: https://github.com/safijari/openpuck/issues/69

Would greatly appreciate if this could be done to avoid feedback when palms touch track pads. Thank you sir for all the hard work!

Originally created by @Dead-0-Zone on GitHub (Jun 20, 2026). Original GitHub issue: https://github.com/safijari/openpuck/issues/69 Would greatly appreciate if this could be done to avoid feedback when palms touch track pads. Thank you sir for all the hard work!

roman closed this issue

2026-10-22 04:58:46 +00:00

roman commented

2026-10-22 04:58:48 +00:00

Author

Owner

@safijari commented on GitHub (Jun 23, 2026):

This seems non trivial. I tried something and it didn't work. Will continue to investigate.

@safijari commented on GitHub (Jun 23, 2026): This seems non trivial. I tried something and it didn't work. Will continue to investigate.

roman commented

2026-10-22 04:58:48 +00:00

Author

Owner

@safijari commented on GitHub (Jul 3, 2026):

#111 should handle it but not yet tested

@safijari commented on GitHub (Jul 3, 2026): #111 should handle it but not yet tested

roman commented

2026-10-22 04:58:50 +00:00

Author

Owner

@Dead-0-Zone commented on GitHub (Jul 3, 2026):

#111 should handle it but not yet tested

OK sounds good friend, will try and test it tonight. So is the issue with Teyleten boards definitely fixed then? I hadn't been keeping up with the project for the last week, so I apologize for not telling you, but when I first tested the gyro out for you in Switch mode to get it straightened out I had random disconnects if you remember. Turns out it was the board because I have the Teyleten version🤦‍♂️

@Dead-0-Zone commented on GitHub (Jul 3, 2026): > [#111](https://github.com/safijari/openpuck/pull/111) should handle it but not yet tested OK sounds good friend, will try and test it tonight. So is the issue with Teyleten boards definitely fixed then? I hadn't been keeping up with the project for the last week, so I apologize for not telling you, but when I first tested the gyro out for you in Switch mode to get it straightened out I had random disconnects if you remember. Turns out it was the board because I have the Teyleten version🤦‍♂️

roman commented

2026-10-22 04:58:50 +00:00

Author

Owner

@safijari commented on GitHub (Jul 4, 2026):

#111 should handle it but not yet tested

OK sounds good friend, will try and test it tonight. So is the issue with Teyleten boards definitely fixed then? I hadn't been keeping up with the project for the last week, so I apologize for not telling you, but when I first tested the gyro out for you in Switch mode to get it straightened out I had random disconnects if you remember. Turns out it was the board because I have the Teyleten version🤦‍♂️

I have yet to have an issue with Teyleten since the most recent antenna power fix but would like confirmation.

You can flash with the uf2 files now that are in releases

@safijari commented on GitHub (Jul 4, 2026): > > [#111](https://github.com/safijari/openpuck/pull/111) should handle it but not yet tested > > OK sounds good friend, will try and test it tonight. So is the issue with Teyleten boards definitely fixed then? I hadn't been keeping up with the project for the last week, so I apologize for not telling you, but when I first tested the gyro out for you in Switch mode to get it straightened out I had random disconnects if you remember. Turns out it was the board because I have the Teyleten version🤦‍♂️ I have yet to have an issue with Teyleten since the most recent antenna power fix but would like confirmation. You can flash with the uf2 files now that are in releases

roman commented

2026-10-22 04:58:51 +00:00

Author

Owner

@Dead-0-Zone commented on GitHub (Jul 4, 2026):

So it's just 1 file I drag onto the board while in DFU mode? I guess I am confused again, because I don't see any UF2 file. Sorry again, I need kindergarten explanation for Windows😅

@Dead-0-Zone commented on GitHub (Jul 4, 2026): So it's just 1 file I drag onto the board while in DFU mode? I guess I am confused again, because I don't see any UF2 file. Sorry again, I need kindergarten explanation for Windows😅

roman commented

2026-10-22 04:58:52 +00:00

Author

Owner

@safijari commented on GitHub (Jul 4, 2026):

https://github.com/safijari/openpuck/actions/runs/28712515707

Sorry about that. Uf2 files are here.

From WebUSB, press UF2 DFU and it'll mount the MCU as a drive. Drag the file into the drive to install that uf2 file.

@safijari commented on GitHub (Jul 4, 2026): https://github.com/safijari/openpuck/actions/runs/28712515707 Sorry about that. Uf2 files are here. From WebUSB, press UF2 DFU and it'll mount the MCU as a drive. Drag the file into the drive to install that uf2 file.

roman commented

2026-10-22 04:58:53 +00:00

Author

Owner

@safijari commented on GitHub (Jul 4, 2026):

Just tested this and I can confirm this is working, will merge and release later.

@safijari commented on GitHub (Jul 4, 2026): Just tested this and I can confirm this is working, will merge and release later.

roman referenced this issue

2026-10-22 05:06:53 +00:00

[PR #31] [CLOSED] LED control, shutdown control, and battery level #160

No labels

pull-request

wontfix

No milestone

No project

No assignees

1 participant

Notifications

Due date

The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set

Reference

safijari/openpuck#31

No description provided.

Rows
Columns