[PR #245] Add per-section reset-to-defaults buttons in WebUSB panel #255

New issue

Open

opened 2026-10-22 05:08:20 +00:00 by roman · 0 comments

roman commented

2026-10-22 05:08:20 +00:00

Owner

📋 Pull Request Information

Original PR: https://github.com/safijari/openpuck/pull/245
Author: @nabaxo
Created: 8/22/2026
Status: 🔄 Open

Base: main ← Head: panel-reset-defaults

📝 Commits (2)

5a96ecf Add per-section "reset to defaults" buttons to WebUSB panel
714d3e4 Better reactivity

📊 Changes

1 file changed (+140 additions, -0 deletions)

View changed files

📝 docs/index.html (+140 -0)

📄 Description

Summary

Adds a Reset button to each config section (chords, mouse sensitivity, gyro mapping, rumble, per-type button mapping) that restores factory defaults via the existing setField() WebUSB path
Adds a global Reset all settings button after the Backup card
Every reset spawns a confirmation modal (reuses the existing betaPopup() pattern) before writing
Buttons auto-disable when current values already match firmware defaults (checked on every blob read)
No firmware changes — panel-only, writes known default values from config.cpp

Details

DEFAULTS constant mirrors firmware defaults from config.cpp (chords, mouse div/friction, rumble scale/style, gyro mapping, per-type back/qam/abSwap/padHaptics/led/rumble/padStick)
updateResetButtons(p) runs at the end of applyBlob(), comparing raw blob bytes against defaults to enable/disable each button
Per-type reset buttons are added dynamically inside buildTypeCfgs() alongside existing controls
Backward compatible with older firmware protocol versions (gracefully handles missing capabilities)

Test plan

Connect puck, verify all reset buttons appear in their sections
Verify buttons are disabled when values match defaults (fresh puck should have all disabled)
Change a setting, verify the corresponding reset button enables
Click reset → confirm modal appears → cancel does nothing
Click reset → confirm → values revert to defaults, button disables
Click "Reset all settings" → all sections revert
Reconnect puck → verify defaults persisted

🤖 Generated with Claude Code

_{🔄 This issue represents a GitHub Pull Request. It cannot be merged through Gitea due to API limitations.}

## 📋 Pull Request Information **Original PR:** https://github.com/safijari/openpuck/pull/245 **Author:** [@nabaxo](https://github.com/nabaxo) **Created:** 8/22/2026 **Status:** 🔄 Open **Base:** `main` ← **Head:** `panel-reset-defaults` --- ### 📝 Commits (2) - [`5a96ecf`](https://github.com/safijari/openpuck/commit/5a96ecf6147c8759fa7e1238a3b898456cdd8be2) Add per-section "reset to defaults" buttons to WebUSB panel - [`714d3e4`](https://github.com/safijari/openpuck/commit/714d3e4bc2d506957e1d3a30498d6d3b983586c9) Better reactivity ### 📊 Changes **1 file changed** (+140 additions, -0 deletions) <details> <summary>View changed files</summary> 📝 `docs/index.html` (+140 -0) </details> ### 📄 Description ## Summary - Adds a **Reset** button to each config section (chords, mouse sensitivity, gyro mapping, rumble, per-type button mapping) that restores factory defaults via the existing `setField()` WebUSB path - Adds a global **Reset all settings** button after the Backup card - Every reset spawns a confirmation modal (reuses the existing `betaPopup()` pattern) before writing - Buttons auto-disable when current values already match firmware defaults (checked on every blob read) - No firmware changes — panel-only, writes known default values from `config.cpp` ## Details - `DEFAULTS` constant mirrors firmware defaults from `config.cpp` (chords, mouse div/friction, rumble scale/style, gyro mapping, per-type back/qam/abSwap/padHaptics/led/rumble/padStick) - `updateResetButtons(p)` runs at the end of `applyBlob()`, comparing raw blob bytes against defaults to enable/disable each button - Per-type reset buttons are added dynamically inside `buildTypeCfgs()` alongside existing controls - Backward compatible with older firmware protocol versions (gracefully handles missing capabilities) ## Test plan - [ ] Connect puck, verify all reset buttons appear in their sections - [ ] Verify buttons are disabled when values match defaults (fresh puck should have all disabled) - [ ] Change a setting, verify the corresponding reset button enables - [ ] Click reset → confirm modal appears → cancel does nothing - [ ] Click reset → confirm → values revert to defaults, button disables - [ ] Click "Reset all settings" → all sections revert - [ ] Reconnect puck → verify defaults persisted 🤖 Generated with [Claude Code](https://claude.com/claude-code) --- <sub>🔄 This issue represents a GitHub Pull Request. It cannot be merged through Gitea due to API limitations.</sub>

roman added the

pull-request

label

2026-10-22 05:08:20 +00:00

roman referenced this issue

2026-10-22 05:08:29 +00:00

[PR #269] [CLOSED] Add Switch 2 Pro controller compatibility #265

roman referenced this issue

2026-10-31 10:04:56 +00:00

[GH-ISSUE #255] Feature request: Switch 2 GL/GR Buttons #113